sas2ircu - LSI 칩이 장착된 RAID Card의 정보 확인이나 구성 Utility
Download : http://www.lsi.com/Pages/user/eula.aspx?file=http%3a%2f%2fwww.lsi.com%2fdownloads%2fPublic%2fHost%2520Bus%2520Adapters%2fHost%2520Bus%2520Adapters%2520Common%2520Files%2fSAS_SATA_6G_P14%2fSAS2IRCU_P14.zip&Source=http%3a%2f%2fwww.lsi.com%2fsupport%2fPages%2fDownload-Results.aspx%3fkeyword%3dsas2ircu
>> "Accept" 클릭 후 zip 파일 다운로드 가능
<사용법>
# ./sas2ircu
LSI Corporation SAS2 IR Configuration Utility.
Version 13.00.00.00 (2012.02.17)
Copyright (c) 2009-2012 LSI Corporation. All rights reserved.
SAS2IRCU: No command specified.
sas2ircu <controller #> <command> <parameters> ...
where <controller #> is:
Number between 0 and 255
where <command> is:
DISPLAY - display controller, volume and physical device info
LIST - Lists all available LSI adapters (does not need ctlr #>
CREATE - create an IR volume
DELETE - Delete entire RAID configuration on the selected controller
DELETEVOLUME - Delete a specific RAID Volume on the selected controller
HOTSPARE - make drive a hot spare
STATUS - display current volume status info
CONSTCHK - Start Consistency Check operation on the specified IR Volume
ACTIVATE - Activate an Inactive IR volume
LOCATE - Locate a disk drive on an enclosure
LOGIR - Upload or Clear IR Log data
BOOTIR - Select an IR Boot Volume as primary boot device
BOOTENCL - Select an Enclosure/Bay as primary boot device
HELP - Display help information
where <parameters> are:
Command specific values; enter "sas2ircu <controller #> <command>"
to get command specific help
<Sample - RAID 1 구성된 서버>
# ./sas2ircu 0 display
LSI Corporation SAS2 IR Configuration Utility.
Version 13.00.00.00 (2012.02.17)
Copyright (c) 2009-2012 LSI Corporation. All rights reserved.
Read configuration has been initiated for controller 0
------------------------------------------------------------------------
Controller information
------------------------------------------------------------------------
Controller type : SAS2008
BIOS version : 7.11.10.00
Firmware version : 7.15.08.00
Channel description : 1 Serial Attached SCSI
Initiator ID : 0
Maximum physical devices : 39
Concurrent commands supported : 2607
Slot : 1
Segment : 0
Bus : 1
Device : 0
Function : 0
RAID Support : Yes
------------------------------------------------------------------------
IR Volume information
------------------------------------------------------------------------
IR volume 1
Volume ID : 79
Status of volume : Okay (OKY)
Volume wwid : 06e0b3bd95c19483
RAID level : RAID1
Size (in MB) : 237824
Physical hard disks :
PHY[0] Enclosure#/Slot# : 1:0
PHY[1] Enclosure#/Slot# : 1:1
------------------------------------------------------------------------
Physical device information
------------------------------------------------------------------------
Initiator at ID #0
Device is a Hard disk
Enclosure # : 1
Slot # : 0
SAS Address : 4433221-1-0700-0000
State : Optimal (OPT)
Size (in MB)/(in sectors) : 238418/488281249
Manufacturer : ATA
Model Number : WDC WD2502ABYS-1
Firmware Revision : 3B05
Serial No : WDWCAT1H513356
GUID : 50014ee1037d2879
Protocol : SATA
Drive Type : SATA_HDD
Device is a Hard disk
Enclosure # : 1
Slot # : 1
SAS Address : 4433221-1-0600-0000
State : Optimal (OPT)
Size (in MB)/(in sectors) : 238418/488281249
Manufacturer : ATA
Model Number : WDC WD2502ABYS-1
Firmware Revision : 3B04
Serial No : WDWCAT1F092519
GUID : 50014ee157e25001
Protocol : SATA
Drive Type : SATA_HDD
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure# : 1
Logical ID : 5782bcb0:30c14a00
Numslots : 8
StartSlot : 0
------------------------------------------------------------------------
SAS2IRCU: Command DISPLAY Completed Successfully.
SAS2IRCU: Utility Completed Successfully.
<Sample - No RAID>
# ./sas2ircu 0 DISPLAY
LSI Corporation SAS2 IR Configuration Utility.
Version 5.00.00.00 (2010.02.09)
Copyright (c) 2009 LSI Corporation. All rights reserved.
Read configuration has been initiated for controller 0
------------------------------------------------------------------------
Controller information
------------------------------------------------------------------------
Controller type : SAS2008
BIOS version : 7.11.10.00
Firmware version : 7.15.08.00
Channel description : 1 Serial Attached SCSI
Initiator ID : 0
Maximum physical devices : 39
Concurrent commands supported : 2607
Slot : 1
Segment : 0
Bus : 1
Device : 0
Function : 0
RAID Support : Yes
------------------------------------------------------------------------
IR Volume information
------------------------------------------------------------------------
------------------------------------------------------------------------
Physical device information
------------------------------------------------------------------------
Initiator at ID #0
Device is a Hard disk
Enclosure # : 1
Slot # : 0
State : Ready (RDY)
Size (in MB)/(in sectors) : 70007/143374649
Manufacturer : SEAGATE
Model Number : ST373455SS
Firmware Revision : S513
Serial No : 3LQ19Q5S
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 1
Slot # : 1
State : Ready (RDY)
Size (in MB)/(in sectors) : 286102/585937499
Manufacturer : SEAGATE
Model Number : ST3300657SS
Firmware Revision : ES64
Serial No : 6SJ1NT96
Protocol : SAS
Drive Type : SAS_HDD
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure# : 1
Logical ID : 5842b2b0:7471b800
Numslots : 8
StartSlot : 0
------------------------------------------------------------------------
SAS2IRCU: Command DISPLAY Completed Successfully.
SAS2IRCU: Utility Completed Successfully.
댓글 없음:
댓글 쓰기